Furitechnics KODAK E 2412B User Manual

February 2003 E-2412B  
TECHNICAL DATA / COLOR MATERIAL  
KODAK EKTACHROME  
RADIANCE III Clear Display Material  
FEATURES  
BENEFITS  
—NOTICE—  
• Easy setup and balancing • Quicker turnaround times;  
improved productivity  
Discontinuance of  
KODAK PROFESSIONAL EKTACHROME  
RADIANCE III Papers and Materials and  
KODAK EKTACHROME R-3 Chemicals  
• Gelatin layer on back  
• Greater stability and reduced  
curl  
Alternative options for image capture and output have  
gradually eliminated the need for PROFESSIONAL  
EKTACHROME RADIANCE III Papers and Materials as well  
as chemicals for Process R-3. Therefore, dependent on  
individual country and market requirements, Kodak will  
discontinue these products as inventories are exhausted  
• Fast printing speed  
• Shorter exposure times  
• Cleaner, whiter whites  
• Extremely low minimum  
density  
• Elimination of print-out  
• Longer life under normal  
display conditions  
Technology has made the option of scanning, manipulating,  
and outputting images directly to traditional color paper very  
popular, and photographers are increasingly using color  
negative film and digital cameras for image capture. Producing  
positive prints, even from transparencies, for image display no  
longer requires the use of RADIANCE Papers and Materials.  
SIZES AVAILABLE  
Sizes and catalog numbers may differ from country to  
country. See your dealer who supplies KODAK  
PROFESSIONAL Products. The following sizes are  
available in the U.S. and Canada.  
Information on Kodak Professional Modular Digital Workflow  
Products (Equipment and Software) is available at  
KODAK EKTACHROME RADIANCE III Clear  
Display Material  
Thank you for using KODAK PROFESSIONAL Products.  
KODAK EKTACHROME RADIANCE III Clear  
Display Material is a versatile color reversal material  
designed for us on illuminators with built-in diffusers. You  
can use it for making color displays in process or repro  
cameras. The originals can be opaque copy, transparencies,  
or three-dimensional objects. You can also use it to make  
displays from slides/transparencies with an enlarger without  
first having to make internegatives.  
It has a clear 7-mil ESTAR Thick base It is available in  
large format rolls.  
Use KODAK EKTACHROME R-3 Chemicals to process  
this material.  
Size  
in. x ft /  
cm x m  
KODAKESTAR  
Thick Base  
Spec No.  
CAT No.  
20 x 100 /  
50.8 x 30.5  
7-mil  
(0.175 mm)  
193  
193  
193  
223  
193  
525 1673  
525 1913  
525 1681  
525 1699  
525 1707  
27.5 x 100 /  
70 x 30.5  
7-mil  
(0.175 mm)  
41.3 x 100 /  
105 x 30.5  
7-mil  
(0.175 mm)  
50 x 100 /  
127 x 30.5  
7-mil  
(0.175 mm)  
50 x 100 /  
127 x 30.5  
7-mil  
(0.175 mm)  
©Eastman Kodak Company, 1999  
Using an Enlarger  
LATENT-IMAGING KEEPING  
You can also use this material to make overheads from slides  
with a conventional enlarger without first making  
internegatives. Equip the enlarger with a heat-absorbing  
glass, and use color-correction filters and a voltage regulator.  
If you are using color-compensating or color-printing filters,  
do not use cyan filters with the suffix 2as in CC10C-2or  
CP10C-2.You will not need an ultraviolet-absorbing filter.  
To make a print 50.8 x 61.0 cm (20 x 24 inches) from a  
35 mm slide, use the following adjustments for your trial  
exposure with a Durst Optimo AC Enlarger (dichroic filters,  
tungsten/halogen light source, 50 mm lens).  
A very limited sensitometric variation is noticeable within  
the first few minutes after exposure. Beyond 5 minutes after  
exposure, there is no significant variation up to several days.  
PROCESSING  
Use KODAK EKTACHROME R-3 or R-3 LU Chemicals to  
process these materials in continuous or roller-transport  
processors. In most instances, these materials will require  
increased replenishment rates. For specific processing  
instructions, see KODAK Publication No. Z-129B, Using  
KODAK EKTACHROME R-3 Chemicals in Continuous and  
Roller-Transport Processors, available from our website at  
Trial Exposure Using a Durst Optimo AC Enlarger to  
Expose KODAK EKTACHROME RADIANCE III Clear Display  
Material  
Exposure Time  
(in Seconds)  
for an Aperture  
DRYING  
Printing Method  
Filters  
Drying conditions for these materials are different from  
those used for EKTACHROME RADIANCE III Papers  
because of the gelatin anti-curl backing on the base side.  
If you process the material in a continuous processor, use  
double-bladed squeegees following the final wash. Use a  
dryer that blows air on both sides of the material. If your  
dryer does not have that capability, you will need to increase  
the drying temperature. Remember to set the temperature  
back before processing paper again; otherwise, you may  
have transport problems and excessive curl in the paper.  
Setting of f/11  
Subtractive  
CC60C + CC45M  
45.0  
Printing Digital Images  
KODAK EKTACHROME RADIANCE III Clear Display  
Material can be used as an output medium with digital  
images on a Durst Lambda Laser Imager. For optimum  
results, refer to your equipment manufacturers  
recommendations for calibration information.  
With a Durst Lambda 130 Imager:  
Basic Calibration  
(Starting Values)  
D-min  
VIEWING  
Evaluate display transparencies under conditions similar to  
those you will use for viewing them. Remember that  
EKTACHROME RADIANCE III Clear Display Material is  
intended for use with translucent light boxes for display  
presentations.  
Y = 41  
M = 0  
R = 10  
G = 10  
C = 71.3  
B = 10  
D = 37.7  
Adjustment for Long or Short Exposures  
Regardless of the type of light source and exposure time,  
there is little or no change in speed or contrast with  
EKTACHROME RADIANCE III Clear Display Material.  
DISPLAYING  
Photographic dyes, like all dyes, can change with time and  
exposure to sunlight, ultraviolet radiation, excessive heat,  
and high humidity. To help prevent changes in photographic  
dyes, follow these guidelines:  
Exposure Time  
Range  
Exposure  
Correction  
+1stop  
Filter  
0.5 to 10 seconds  
None  
3
Display prints with the lowest-light level consistent with  
viewing needs.  
10 to 100 seconds CC05Y or equivalent  
None  
Maintain temperature and low humidity.  
KODAK EKTACHROME RADIANCE III Clear Display Material E-2412B  
3
Spectral-Dye-Density Curves  
CURVES  
2.5  
2.0  
Characteristic Curves  
Process: R-3  
4.0  
0.5 second  
Exposure:  
Process: R-3  
Densitometry: Status A, Transmission  
G
3.0  
2.0  
1.0  
1.5  
1.0  
R
B
Cyan  
Yellow  
Magenta  
0.5  
0.0  
400  
F009_0301AC  
500  
600  
700  
WAVELENGTH (nm)  
0.0  
0.0  
F009_0299AC  
1.0  
2.0  
3.0  
4.0  
LOG EXPOSURE (lux-seconds)  
Spectral-Sensitivity Curves  
1.0  
0.0  
1.0  
2.0  
3.0  
Magenta-  
Forming  
Layer  
Process: R-3  
Yellow-  
Forming  
Layer  
Cyan-  
Forming  
Layer  
250 300 350 400 450 500 550 600 650 700 750  
WAVELENGTH (nm)  
*Sensitivity = reciprocal of exposure (erg/cm2 ) required  
to produce specified density  
F009_0300AC  
NOTICE: The sensitometric curves and data in this publication represent product tested  
under the conditions of exposure and processing specified. They are representative of  
production coatings, and therefore do not apply directly to a particular box or roll of  
photographic material. They do not represent standards or specifications that must be met  
by Eastman Kodak Company. The company reserves the right to change and improve  
product characteristics at any time.  
4
KODAK EKTACHROME RADIANCE III Clear Display Material E-2412B  
MORE INFORMATION  
Kodak has many publications to assist you with information  
on Kodak products, equipment, and materials.  
The following publications are available from dealers who  
sell Kodak products, or you can contact Kodak in your  
country for more information.  
For the latest version of technical support publications for  
KODAK PROFESSIONAL Products, visit Kodak on-line at:  
If you have questions about KODAK PROFESSIONAL  
Products, call Kodak.  
In the U.S.A.:  
E-30  
Storage and Care of KODAK Photographic  
Materials—Before and After Processing  
1-800-242-2424, Ext. 19, MondayFriday  
9 a.m.7 p.m. (Eastern time)  
In Canada:  
E-1766  
E-1767  
KODAK EKTACHROME RADIANCE III Paper  
KODAK EKTACHROME RADIANCE III SELECT  
Material  
1-800-465-6325, MondayFriday  
8 a.m.5 p.m. (Eastern time)  
E-2410  
E-2411  
KODAK EKTACHROME RADIANCE III Copy Paper  
KODAK EKTACHROME RADIANCE III HC Copy  
Paper  
Note: The Kodak materials described in this publication for use  
with KODAK EKTACHROME RADIANCE III Display  
Materials are available from dealers who supply KODAK  
PROFESSIONAL Products. You can use other materials, but  
you may not obtain similar results.  
E-2412A KODAK EKTACHROME RADIANCE III Overhead  
Material  
E-2413  
Z-129  
KODAK EKTACHROME RADIANCE III Translucent  
Display Material  
Using KODAK EKTACHROME R-3 Chemicals, Sixth  
Edition  
Z-129A  
Z-129B  
KODAK EKTACHROME R-3 and R-3000 Chemicals  
Using KODAK EKTACHROME R-3 Chemicals in  
Continuous and Roller-Transport Processors  
Z-129C  
Z-129E  
Z-129G  
Using KODAK EKTACHROME R-3000 and R-3  
Chemicals in Batch-Type Processors  
Monitoring and Troubleshooting Processes Using  
KODAK EKTACHROME R-3 and R-3000 Chemicals  
Recovering Silver from Processes Using KODAK  
EKTACHROME R-3 Chemicals  
Using KODAK EKTACHROME R-3 LU Chemicals in  
Roller-Transport Processors  
Z-129H  
KODAK EKTACHROME RADIANCE III Clear Display Material E-2412B  
5
KODAK EKTACHROME RADIANCE III Clear Display Material  
KODAK EKTACHROME  
RADIANCE III Clear Display  
Material  
Kodak, Kodak Professional,  
Ektachrome, Estar, Radiance, and Wratten are trademarks.  
Minor Revision 2-03  
Printed in U.S.A.  
KODAK Publication No. E-2412B  

Hitachi 35TX69K User Manual
Hanns G LCD DISPLAY HH251 User Manual
Electro Voice 1252 User Manual
Electrolux EHGT326X User Manual
Electrolux Air O Convect 62 User Manual
DoubleSight Displays DoubleSight DS 1900S User Manual
Asus P8B75 M LX User Manual
Asus M2N E SLI User Manual
Asus Computer Monitor VE248N User Manual
Analog Devices ADSST SALEM 3T User Manual